P&F Intrinsic Safety Barrier 24V DC KFD2-STC5-Ex1.2O SMART Transmitter Power Supply

P+F SMART Transmitter Power Supply KFD2-STC5-Ex1.2O

1-channel isolated barrier

24V DC supply (Power Rail)

Input 2-wire and 3-wire SMART transmitters and 2-wire SMART

current sources

Signal splitter (1 input and 2 outputs)

Dual output 4 mA ... 20 mA current sink/current source 

Terminals with test points

Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Function

This isolated barrier is used for intrinsic safety applications.

The device supplies 2-wire and 3-wire SMART transmitters, and can also be used with 2-wire SMART current sources. It transfers the analog input signal to the safe area as two isolated output signals.

Digital signals may be superimposed on the input signal in the hazardous or non-hazardous area and are transferred bi-directionally. The device provides a sink mode or a source mode output on the safe area terminals.

The device has an internal resistor. Use this resistor if the HART communication resistance in the control circuit is too low. Test sockets for the connection of HART communicators are integrated into the terminals of the device.